Skip to content

FC 225HP X-Ray Generator

As Metal Ceramic x-ray tubes have evolved Gulmay has developed its product in 3 phases to culminate in a single drive platform capable of powering up to 1000 W and with options of single or dual filament and unipolar or bipolar tube connection. The current drive platform is based on the 'FC' family using IGBT's at 25 kHz with reduced air inflow to facilitate operation in harsher conditions.
  • The 'HP' derivative is capable of 1000 W.
  • Single and dual filament versions are available.
  • All units connect to the X-ray tube with industry standard rubber coned connectors designated either R10, R24 or R30.
  • All units are capable of operation with external and embedded controllers.
  • Oil is used as an insulation medium together with epoxy encapsulated sub assemblies. No vacuum impregnation is required and local servicing is possible.

Technical Specification

kV Range 10 - 225mA Range 0 - 12 within a 1000W limit
Line Regulation < 0.2% change for an input change of +/- 10% in 2 SecondsLoad Regulation < 0.2% change for a load change from 100uA to 10mA in 2 Seconds
Output Drift 0.1% over 8 Hours after initial 30 Minute equalisationOutput Risetime 20kV per second.
Output Accuracy +/- 2.5%Filament Supply Up to 9V at 4.5A
Output Connector R30Environmental Conditions 10 to 35 Deg. C at up to 80% Humidity, non condensing
Input Voltage 220 V AC +/- 10% 47 – 63 HzMultiplier Frequency 25kHz
Size mm (WxLxH) 415 x 830 x 545Input Current 6.8A at 220V AC
Weight 160