Skip to content

CP 225 X-Ray Generator

The CP 225 x-ray generator is available in either unipolar or bipolar configurations (unipolar pictured) with both single and dual focus options available. The CP series uses 25 kHz for EHT generation and the family of products offers low ripple and low drift.

Accurate, precise and repeatable operation makes the CP range ideal for a broad range of radiographic, radioscopic and scanning applications. The CP series is the product of choice in high powered security applications, as well as medical radiotherapy, calibration laboratory and irradiation applications.
  • All units connect to the x-raytube with industry standard rubber coned connectors designated R10, R24 or R30.
  • All units are capable of operation with external and embedded controllers.
  • Oil is used as an insulation medium together with epoxy encapsulated sub assemblies. No vacuum impregnation is required and local servicing is possible.

Technical Specification

kV Range 20 - 225mA Range 0 - 30 within a 3000W limit
Line Regulation Less than a 0.2% change for an input change of +/- 10% in 2 seconds.Load Regulation Less than a 0.2% change for a load change from 100uA to 30mA in 5 seconds.
Output Drift 0.1% over 8 hours after initial 30 minute equalisation.Output Risetime 20kV per second.
Output Accuracy +/- 2.5%Filament Supply Up to 9V @ 4.5A
Output Connector R30Environmental Conditions 10 - 35Deg. C at up to 80% humidity, non condensing
Input Voltage 230 V AC +/- 10% 47 - 63 HzMultiplier Frequency 25kHz
Size mm (WxLxH) 435 x 818 x 780Input Current 27A at 220V AC
Weight 240